MTM Hydro 3/8" Fixed Acid Chemical Injector with 2.3mm Orifice 30" Diameter Includes replacement pump cartridge

Includes replacement pump cartridge

Available with V-Packing seals for abrasives or U-Cup seals for UV coatings

sprays out at the end of the spindle behind the splash and safety guard to extend drill bit and tap lifespan

Works with ANY airless sprayer

The RAC X LP 517 SwitchTip provides the industry’s best finish at the lowest airless spray pressure for reduced overspray and longer pump life

MTM Hydro 3/8" Fixed Acid Chemical Injector with 2.3mm Orifice 30" Diameter Includes replacement pump cartridgeMTM Hydro's Fixed Chemical injectors were developed for use in a downstream chemical injection system. Downstream refers to 'after the pump and unloader' where the injector operates through the use of the Venturi effect. When the low pressure side of a dual lance is opened, the chemical injector's orifice is, then, the point of restriction which immediately creates a vacuum and begins drawing chemical. All MTM Hydro chem injectors have a maximum