DK 400WB 1 Gallon Part A Parts Surpasses performance requirement of US

Surpasses performance requirement of US Corps of Engineers

The required profile is a CSP-2 through CSP-4

General application thickness should be no greater than the coarse aggregate in Concrete Renew Fine and up to 1/8" (3 mm) per lift

” Surface Delay (see TDS) misted ahead of the tool is appropriate

Deep exposed aggregate or a deep stamped concrete will require a 19 mil roller sleeve

DK 400WB 1 Gallon Part A Parts Surpasses performance requirement of USDura Kote clear water based floor polyurethane is a 2 component 57% solids, acrylic polyurethane designed as a non yellowing clear coating for concrete, cement based overlays, or as a top coat on epoxy systems. The commercial grade clear finish topcoat is available in gloss or satin finishes provides the durability of a solvent base system with the ease and safety of a low VOC (73 g L) water base system. Unlike nearly all polyurethanes, Dura Kote (DK)