Air Pump and Vacuum DC Motor - 4.5 V and 2.5 LPM ZR370-02PM Sales Construct your own lightsaber using

Construct your own lightsaber using 3D printed parts and electronics from Adafruit

also sometimes known as a buffer or amplifier

making it easy to use two simple motor controllers in tandem on an RC-controlled differential-drive robot (you might find our RC servo Y splitter cables useful for connecting two SMCs to a single RC receiver)

IXTP1N120 transfer characteristics

com/products/12567)

Air Pump and Vacuum DC Motor - 4.5 V and 2.5 LPM ZR370-02PM Sales Construct your own lightsaber usingMake inflatables or air powered projects with this simple air pump. It's great for beginner projects and super easy to use! The pump is basically a DC motor that is powered with ~4. 5V and draws about ~500 mA. 5V should be just fine, so you can power it from the same power supply you use for other DC motors or servos. When powered, the pump sucks air in from the side of the plastic casing and pushes it out the tubing port. Reversing the motor polarity