Stepper Motor: Bipolar, 200 Steps/Rev, 28x32mm, 3.8V, 670mA hub-sensoren 2 mm × 14

2 mm × 14

The DRV8801 features a simple two-pin speed/direction interface

even under difficult environmental conditions

LOW COST HIGH SPEED ARM USB JTAG (SUPPORTED BY OPENOCD OPEN SOURCE ARM DEBUGGER)

Inductance per phase: 4

Stepper Motor: Bipolar, 200 Steps/Rev, 28x32mm, 3.8V, 670mA hub-sensoren 2 mm × 14This hybrid bipolar stepping motor has a 1. 8 step angle (200 steps revolution). Each phase draws 670 mA at 3. 5 V, allowing for a holding torque of 600 g cm (8. 3 oz in). The motor has four color coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be controlled by a pair of suitable H bridges (one for each coil), but we recommend using a bipolar stepper motor driver. Our 5mm universal