Black Rear Shock Absorbers: Yamaha SR250 SR 250 SE (1980-1982) Yamaha YFM225 These steering bearings are taper

These steering bearings are taper roller style and have been designed to replace the original bearing set on a Yamaha YZ490 for the years shown above

Triumph Tiger 1050 EFI (2007-2010)

2 connector points

If the readings are above what your manual states (commonly no greater than 15 volts but can vary from bike to bike so check your manual) then please remove the rectifier and contact us directly

This ignition coil pack with spark plug cap has been manufactured to replace 5KM-82310-00

Black Rear Shock Absorbers: Yamaha SR250 SR 250 SE (1980-1982) Yamaha YFM225 These steering bearings are taperBrand new set of black rear shock absorbers to fit: Yamaha SR 250 SE (3Y8) (1980 1982). This set of rear shocks have been manufactured to replace the original factory shocks on a Yamaha SR250 SE for the years and models shown above. It has 300mm pin pin mounting points, with both pins being 12mm. You may need to change the bushes, either by using your old bushes or by purchasing spare bushes from us. Please see our other listings for these. The shocks