Complete Wire Return Assembly DIM=19x13x13 It's everything you need to

It's everything you need to operate a tarp gear motor

Stainless Steel Grommets every 3' around the perimeter and every 1' along pocket

For applications narrower than 93" the axle can be slid apart and cut then reassembled to accommodate the narrower width

Compatible with Tarping Systems INC

This is everything you need to replace or add a new heavy duty 1-1/4" bow

Complete Wire Return Assembly DIM=19x13x13 It's everything you need toThis is a complete spring loaded roll pipe return assembly. These can be used on the front or rear of the trailer to assist the 2" roll bar in rolling over the tarp bows evenly. If you are having issues with the non crank end of the pipe not wanting to roll over bows when uncovering this is a good solution for that problem.